Rubber track 36 in (914 mm) for Challenger MT800, 392 in circumference
6500 Series · High Roading tread
Description and use
Camso E36AS03002 / AGCO 581870D1 is a 36 in (914 mm) 6500 High Roading tread rubber track for MT800 392 in.
Specifications: 1.65 in (42 mm) carcass, 52 guide lugs, 100 tread bars, and 3.0 in (75 mm) tread height.
Designed for MT800 392 in (MT835, MT835B, MT835C, MT845, MT845B, MT845C, MT845E, MT855, MT855B, MT855C, MT855E, MT865, MT865B, MT865C, MT865E, MT875B, MT875C, MT875E); track circumference 392 in (9956 mm).
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 36 in (914 mm), MT800 392 in, and the part number before ordering.
Specifications
- Camso P/N
- E36AS03002
- AGCO P/N
- 581870D1
- Machine family
- Challenger MT800
- Models
- MT835, MT835B, MT835C, MT845, MT845B, MT845C, MT845E, MT855, MT855B, MT855C, MT855E, MT865, MT865B, MT865C, MT865E, MT875B, MT875C, MT875E
- Circumference
- 392 in (9956 mm)
- Width
- 36 in (914 mm)
- Carcass thickness
- 1.65 in (42 mm)
- Guide lugs
- 52
- Tread bars
- 100
- Tread height
- 3.0 in (75 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- 6500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 36 in (914 mm) width and MT800 392 in machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 36 in (914 mm), and MT800 392 in undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.