Rubber track 18 in (457 mm) for Challenger MT800, 392 in circumference
6500 Series · High Roading tread
Description and use
Camso E18AS02930 / AGCO 581860D1 is a 18 in (457 mm) 6500 High Roading tread rubber track for MT800 392 in.
Specifications: 1.73 in (44 mm) carcass, 52 guide lugs, 100 tread bars, and 3.0 in (75 mm) tread height.
Designed for MT800 392 in (MT835, MT835B, MT835C, MT845, MT845B, MT845C, MT845E, MT855, MT855B, MT855C, MT855E, MT865, MT865B, MT865C, MT865E, MT875B, MT875C, MT875E); track circumference 392 in (9956 mm).
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 18 in (457 mm), MT800 392 in, and the part number before ordering.
Specifications
- Camso P/N
- E18AS02930
- AGCO P/N
- 581860D1
- Machine family
- Challenger MT800
- Models
- MT835, MT835B, MT835C, MT845, MT845B, MT845C, MT845E, MT855, MT855B, MT855C, MT855E, MT865, MT865B, MT865C, MT865E, MT875B, MT875C, MT875E
- Circumference
- 392 in (9956 mm)
- Width
- 18 in (457 mm)
- Carcass thickness
- 1.73 in (44 mm)
- Guide lugs
- 52
- Tread bars
- 100
- Tread height
- 3.0 in (75 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- 6500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 18 in (457 mm) width and MT800 392 in machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 18 in (457 mm), and MT800 392 in undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.