Rubber track 30 in (762 mm) for John Deere 8RX — rear axle
Description and use
Camso F30CA03717 / John Deere TR129219 is a 30 in (762 mm) RD 4500 High Roading tread rubber track for John Deere 8RX — rear axle.
Specifications: 1.3 in (33 mm) carcass, 42 guide lugs, 84 tread bars, and 1.6 in (40.6 mm) tread height.
Designed for John Deere 8RX — rear axle (8RX — rear axle); track circumference —.
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 30 in (762 mm), John Deere 8RX — rear axle, and the part number before ordering.
Specifications
- Camso P/N
- F30CA03717
- John Deere P/N
- TR129219
- Machine family
- John Deere 8RX Series
- Models
- 8RX — rear axle
- Width
- 30 in (762 mm)
- Carcass thickness
- 1.3 in (33 mm)
- Guide lugs
- 42
- Tread bars
- 84
- Tread height
- 1.6 in (40.6 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- RD 4500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 30 in (762 mm) width and John Deere 8RX — rear axle machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 30 in (762 mm), and John Deere 8RX — rear axle undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.