Rubber track 27.5 in (699 mm) for CAT Challenger 65/75/85/95
5500 Series · High Roading tread
Description and use
Camso 652-2714 / CAT — is a 27.5 in (699 mm) 5500 High Roading tread rubber track for CAT Challenger 65/75/85/95.
Specifications: 41 mm carcass, 48 guide lugs, 96 tread bars, and 2.6 in (67 mm) tread height.
Designed for CAT Challenger 65/75/85/95 (Challenger 65, Challenger 75, Challenger 85, Challenger 95); track circumference —.
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 27.5 in (699 mm), CAT Challenger 65/75/85/95, and the part number before ordering.
Specifications
- Camso P/N
- 652-2714
- Machine family
- CAT Challenger 65/75/85/95
- Models
- Challenger 65, Challenger 75, Challenger 85, Challenger 95
- Width
- 27.5 in (699 mm)
- Carcass thickness
- 41 mm
- Guide lugs
- 48
- Tread bars
- 96
- Tread height
- 2.6 in (67 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- 5500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 27.5 in (699 mm) width and CAT Challenger 65/75/85/95 machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 27.5 in (699 mm), and CAT Challenger 65/75/85/95 undercarriage; matching dimensions alone do not prove interchangeability.
27.5 in (699 mm)652-271430 in (762 mm)652-3052
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.