Rubber track 18 in (457 mm) for CAT Challenger 35/45/55
5500 Series · High Roading tread
Description and use
Camso 650-1842 / CAT — is a 18 in (457 mm) 5500 High Roading tread rubber track for CAT Challenger 35/45/55.
Specifications: 39 mm carcass, 48 guide lugs, 48 RH tread bars, and 2.6 in (67 mm) tread height.
Designed for CAT Challenger 35/45/55 (Challenger 35, Challenger 45, Challenger 55); track circumference —.
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 18 in (457 mm), CAT Challenger 35/45/55, and the part number before ordering.
Specifications
- Camso P/N
- 650-1842
- Machine family
- CAT Challenger 35/45/55
- Models
- Challenger 35, Challenger 45, Challenger 55
- Width
- 18 in (457 mm)
- Carcass thickness
- 39 mm
- Guide lugs
- 48
- Tread bars
- 48 RH
- Tread height
- 2.6 in (67 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- 5500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 18 in (457 mm) width and CAT Challenger 35/45/55 machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 18 in (457 mm), and CAT Challenger 35/45/55 undercarriage; matching dimensions alone do not prove interchangeability.
18 in (457 mm)650-1842/43
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.