Rubber track 30 in (762 mm) for STX / Steiger Quadtrac, 252 in circumference
6500 Series · Heavy Ag heavy-duty tread
Description and use
Camso E30BE02858 / CNH 84606975 is a 30 in (762 mm) 6500 Heavy Ag heavy-duty tread rubber track for STX / Steiger Quadtrac.
Specifications: 35 mm carcass, 42 guide lugs, 84 tread bars, and 2 in (50.8 mm) tread height.
Designed for STX / Steiger Quadtrac (Steiger Quadtrac, Quadtrac); track circumference 252 in (6401 mm).
The Heavy Ag heavy-duty tread profile is intended for heavy field cycles and high drawbar loads; confirm 30 in (762 mm), STX / Steiger Quadtrac, and the part number before ordering.
Specifications
- Camso P/N
- E30BE02858
- CNH P/N
- 84606975
- Machine family
- CASE IH STX / Steiger Quadtrac
- Models
- Steiger Quadtrac, Quadtrac
- Circumference
- 252 in (6401 mm)
- Width
- 30 in (762 mm)
- Carcass thickness
- 35 mm
- Guide lugs
- 42
- Tread bars
- 84
- Tread height
- 2 in (50.8 mm)
Best for
- Recommended for heavy field cycles and high drawbar loads.
- 6500 Series construction under loads appropriate to the Heavy Ag heavy-duty tread profile.
- Exact selection by 30 in (762 mm) width and STX / Steiger Quadtrac machine family.
Limits
- May be excessive for light work where minimum soil disturbance matters more.
- Always verify the part number, 30 in (762 mm), and STX / Steiger Quadtrac undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.