Rubber track 30 in (762 mm) for STX / Steiger Quadtrac, 252 in circumference
5500 Series · Scraper heavy-duty tread
Description and use
Camso 654-3011 / CNH — is a 30 in (762 mm) 5500 Scraper heavy-duty tread rubber track for STX / Steiger Quadtrac.
Specifications: — carcass, — guide lugs, — tread bars, and — tread height.
Designed for STX / Steiger Quadtrac (Steiger Quadtrac, Quadtrac); track circumference 252 in (6401 mm).
The Scraper heavy-duty tread profile is intended for heavy scraper and non-agricultural duty cycles; confirm 30 in (762 mm), STX / Steiger Quadtrac, and the part number before ordering.
Specifications
- Machine family
- CASE IH STX / Steiger Quadtrac
- Models
- Steiger Quadtrac, Quadtrac
- Circumference
- 252 in (6401 mm)
- Width
- 30 in (762 mm)
Best for
- Recommended for heavy scraper and non-agricultural duty cycles.
- 5500 Series construction under loads appropriate to the Scraper heavy-duty tread profile.
- Exact selection by 30 in (762 mm) width and STX / Steiger Quadtrac machine family.
Limits
- Unnecessary for routine field work or low-disturbance applications.
- Always verify the part number, 30 in (762 mm), and STX / Steiger Quadtrac undercarriage; matching dimensions alone do not prove interchangeability.
30 in (762 mm)654-3011
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.