Rubber track 24 in (610 mm) for CASE IH / New Holland Combine, 264 in circumference
RD 4500 Series · High Roading tread
Description and use
Camso F24BM03618 / CNH 90450121 is a 24 in (610 mm) RD 4500 High Roading tread rubber track for CASE IH / New Holland Combine.
Specifications: — carcass, — guide lugs, — tread bars, and — tread height.
Designed for CASE IH / New Holland Combine (CASE IH Axial Flow, New Holland CR-CX Combine); track circumference 264 in (6706 mm).
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 24 in (610 mm), CASE IH / New Holland Combine, and the part number before ordering.
Specifications
- Camso P/N
- F24BM03618
- CNH P/N
- 90450121
- Machine family
- CASE IH Axial Flow / New Holland CR-CX Combine
- Models
- CASE IH Axial Flow, New Holland CR-CX Combine
- Circumference
- 264 in (6706 mm)
- Width
- 24 in (610 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- RD 4500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 24 in (610 mm) width and CASE IH / New Holland Combine machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 24 in (610 mm), and CASE IH / New Holland Combine undercarriage; matching dimensions alone do not prove interchangeability.
24 in (610 mm)F24BM03618
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.