Rubber track 24 in (610 mm) for CASE IH / New Holland Combine, 252 in circumference
3500 Series · General Ag field tread
Description and use
Camso B24BF03076 / CNH 84289715 is a 24 in (610 mm) 3500 General Ag field tread rubber track for CASE IH / New Holland Combine.
Specifications: — carcass, — guide lugs, — tread bars, and — tread height.
Designed for CASE IH / New Holland Combine (CASE IH Axial Flow, New Holland CR-CX Combine); track circumference 252 in (6401 mm).
The General Ag field tread profile is intended for general field work and mixed soils; confirm 24 in (610 mm), CASE IH / New Holland Combine, and the part number before ordering.
Specifications
- Camso P/N
- B24BF03076
- CNH P/N
- 84289715
- Machine family
- CASE IH Axial Flow / New Holland CR-CX Combine
- Models
- CASE IH Axial Flow, New Holland CR-CX Combine
- Circumference
- 252 in (6401 mm)
- Width
- 24 in (610 mm)
Best for
- Recommended for general field work and mixed soils.
- 3500 Series construction under loads appropriate to the General Ag field tread profile.
- Exact selection by 24 in (610 mm) width and CASE IH / New Holland Combine machine family.
Limits
- Not a substitute for a dedicated tread in extreme abrasion or scraper duty.
- Always verify the part number, 24 in (610 mm), and CASE IH / New Holland Combine undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.