Rubber track 20 in (508 mm) for Challenger MT700, 359 in circumference
6500 Series · High Roading tread
Description and use
Camso E20BY03232 / AGCO 588719D1 is a 20 in (508 mm) 6500 High Roading tread rubber track for MT700 359 in.
Specifications: 1.65 in (42 mm) carcass, 48 guide lugs, 94 tread bars, and 3.0 in (75 mm) tread height.
Designed for MT700 359 in (MT738, MT740, MT743); track circumference 359 in (9118 mm).
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 20 in (508 mm), MT700 359 in, and the part number before ordering.
Specifications
- Camso P/N
- E20BY03232
- AGCO P/N
- 588719D1
- Machine family
- Challenger MT700
- Models
- MT738, MT740, MT743
- Circumference
- 359 in (9118 mm)
- Width
- 20 in (508 mm)
- Carcass thickness
- 1.65 in (42 mm)
- Guide lugs
- 48
- Tread bars
- 94
- Tread height
- 3.0 in (75 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- 6500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 20 in (508 mm) width and MT700 359 in machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 20 in (508 mm), and MT700 359 in undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.