Rubber track 18 in (457 mm) for Challenger MT700, 348 in circumference
4500 Series · Low Ground Disturbance tread
Description and use
Camso F18AR02927 / AGCO 581847D1 is a 18 in (457 mm) 4500 Low Ground Disturbance tread rubber track for MT700 348 in.
Specifications: 1.45 in (37 mm) carcass, 46 guide lugs, 130 tread bars, and 1.5 in (38 mm) tread height.
Designed for MT700 348 in (MT735, MT745, MT745B, MT745C, MT755, MT755B, MT755C, MT755D, MT755E, MT765, MT765B, MT765C, MT765D, MT765E, MT775E); track circumference 348 in (8839 mm).
The Low Ground Disturbance tread profile is intended for work requiring low surface disturbance and a smoother footprint; confirm 18 in (457 mm), MT700 348 in, and the part number before ordering.
Specifications
- Camso P/N
- F18AR02927
- AGCO P/N
- 581847D1
- Machine family
- Challenger MT700 A-E
- Models
- MT735, MT745, MT745B, MT745C, MT755, MT755B, MT755C, MT755D, MT755E, MT765, MT765B, MT765C, MT765D, MT765E, MT775E
- Circumference
- 348 in (8839 mm)
- Width
- 18 in (457 mm)
- Carcass thickness
- 1.45 in (37 mm)
- Guide lugs
- 46
- Tread bars
- 130
- Tread height
- 1.5 in (38 mm)
Best for
- Recommended for work requiring low surface disturbance and a smoother footprint.
- 4500 Series construction under loads appropriate to the Low Ground Disturbance tread profile.
- Exact selection by 18 in (457 mm) width and MT700 348 in machine family.
Limits
- Not intended for maximum pull in deep mud or rocky ground.
- Always verify the part number, 18 in (457 mm), and MT700 348 in undercarriage; matching dimensions alone do not prove interchangeability.
18 in (457 mm)F18AR0292725 in (635 mm)F25AR02992
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.