Rubber track 30 in (762 mm) for Challenger MT700, 348 in circumference
6500 Series · High Roading tread
Description and use
Camso E30AR02994 / AGCO 581856D1 is a 30 in (762 mm) 6500 High Roading tread rubber track for MT700 348 in.
Specifications: 1.65 in (42 mm) carcass, 46 guide lugs, 92 tread bars, and 3.0 in (75 mm) tread height.
Designed for MT700 348 in (MT735, MT745, MT745B, MT745C, MT755, MT755B, MT755C, MT755D, MT755E, MT765, MT765B, MT765C, MT765D, MT765E, MT775E); track circumference 348 in (8839 mm).
The High Roading tread profile is intended for frequent or extended travel on firm surfaces; confirm 30 in (762 mm), MT700 348 in, and the part number before ordering.
Specifications
- Camso P/N
- E30AR02994
- AGCO P/N
- 581856D1
- Machine family
- Challenger MT700 A-E
- Models
- MT735, MT745, MT745B, MT745C, MT755, MT755B, MT755C, MT755D, MT755E, MT765, MT765B, MT765C, MT765D, MT765E, MT775E
- Circumference
- 348 in (8839 mm)
- Width
- 30 in (762 mm)
- Carcass thickness
- 1.65 in (42 mm)
- Guide lugs
- 46
- Tread bars
- 92
- Tread height
- 3.0 in (75 mm)
Best for
- Recommended for frequent or extended travel on firm surfaces.
- 6500 Series construction under loads appropriate to the High Roading tread profile.
- Exact selection by 30 in (762 mm) width and MT700 348 in machine family.
Limits
- Not the preferred choice for deep mud or maximum field traction.
- Always verify the part number, 30 in (762 mm), and MT700 348 in undercarriage; matching dimensions alone do not prove interchangeability.
Not sure this is your undercarriage?Send the number from the old track or a label photo - an engineer will check circumference, gauge and width and call back within 15 working minutes.